Skip to product information
1 of 4

P&S Detailing Products

P&S Brake Buster: Acid-Free Foaming Wheel Cleaner

P&S Brake Buster: Acid-Free Foaming Wheel Cleaner

Regular price €16,12
Regular price Sale price €16,12
Sale Sold out
Taxes included. Shipping calculated at checkout.
Size
View full details

P&S Brake Buster: the wheel cleaner that gives brake dust no chance

Black haze on your wheels after a drive? That's brake dust, and regular car shampoo won't shift it. P&S Brake Buster is an acid-free, foaming wheel cleaner that dissolves brake dust, road grime and oil in one pass, no acid, no harsh fumes, no risk to your wheels.

Whether you're washing a daily driver or prepping a show car, Brake Buster cleans deeper than a regular shampoo and stays safe on almost every wheel finish: clear coat, painted, polished aluminium, chrome and bare metal.

Why this works

  • Acid-free: safe on every common wheel finish, from clear coat to chrome.
  • Clings where it counts: the foam stays on the wheel instead of running straight off, giving it time to work.
  • Dissolves everything: brake dust, road oil, tar and traffic film, gone in one shot.
  • No harsh fumes: more pleasant to use in an enclosed garage than acid-based wheel cleaners.
  • Foam cannon friendly: dilute and spray the whole car as a pre-rinse for heavy contamination.
  • Made in USA: P&S Detail Products, manufactured by Appearance Technology Group.

How to use P&S Brake Buster

  1. Rinse the wheels first to remove loose dirt and grit.
  2. Spray Brake Buster generously on a cool wheel, including the inner barrel.
  3. Let it dwell 1-3 minutes. The foam lifts the contamination loose.
  4. Agitate with a soft wheel brush, paying extra attention to spokes and lug holes.
  5. Rinse thoroughly with a strong stream of water until the wheel shines again.

Pro tip: for heavy contamination, dilute Brake Buster 1:1 with water in a foam cannon and let it soak before you start scrubbing.

Important: never spray on a hot wheel. Let it cool first, or the product flashes off too fast and leaves water spots.

Product specs

  • Type: acid-free foaming wheel cleaner
  • Form: ready to use spray, also foam cannon compatible at 1:1 to 1:4 dilution
  • Surfaces: all wheel finishes, including clear coat, painted, polished aluminium, chrome and bare metal
  • pH: neutral, acid-free
  • Sizes: 473ml and 3800ml (refill)
  • Made in: USA, by Appearance Technology Group (ATG)
  • Product line: P&S Detail Products

FAQ

Is Brake Buster safe on every wheel finish?
Yes. The acid-free formula is safe on clear coat, painted, polished aluminium, chrome and bare metal wheels. The same product detailers use on six-figure show cars.

Can I use it in a foam cannon?
Yes, diluted 1:1 to 1:4 depending on how dirty the wheels are. For maintenance washes, dilute further.

Can it go on calipers and brake components?
Yes, once they're fully cooled. Rinse thoroughly afterwards. Don't spray directly on hot brakes or on rotor friction surfaces.

Will it damage a ceramic-coated wheel?
No. Neutral pH, no acid, the coating stays put.

How often should I deep clean my wheels with it?
Every 4-6 weeks for most drivers. Track cars need it more often since their pads generate more brake dust.

Where is P&S made?
P&S Detail Products is made in the USA by Appearance Technology Group (ATG). The Rag Company Europe is the official European distributor.

Product video